Nova cisterna za gorivo Töke Makina aluminum adr fuel tanker ready for delivery new vehicles - 2025
Če se odločite za nakup opreme po nizki ceni, se prepričajte, da ste komunicirati z resničnim prodajalcem. Izvedite čim več informacij o lastniku opreme. Eden od načinov goljufanja se je predstavljati za resnično podjetje. V primeru suma o tem obvestite nas za dodatno kontrolo preko obrazca za povratne informacije.
Preden se odločite za nakup natančno preglejte več prodajnih ponudb, da boste razumeli povprečno ceno izbrane opreme. Če je cena ponudbe, ki vam je všeč, veliko nižja od podobnih ponudb, pomislite na to. Pomembna razlika v ceni lahko kaže na skrite napake ali pa na poskus prodajalca na goljufivo ravnanje.
Ne kupujte izdelkov, katerih cena je preveč drugačna od povprečne cene za podobno opremo.
Ne dajajte soglasja za dvomljive obljube in predplačane izdelke. V primeru dvoma se nikar ne bojte pojasniti podrobnosti, zahtevajte dodatne fotografije in dokumente za opremo, preverite pristnost dokumentov in postavite vprašanja.
Gre za najpogostejšo vrsto goljufije. Nepošteni prodajalci lahko zahtevajo določen znesek - predplačilo - torej "rezervacijo" vaše pravice do nakupa opreme. Tako goljufi lahko zberejo veliko količino denarja in izginejo, mi pa ne moremo več stopiti z njimi v stik.
- Prenos predplačila na kartico
- Ne opravite predplačila brez dokumentov, ki potrjujejo postopek prenosa denarja, če prodajalec v sporočilu izraža dvom.
- Prenos na račun "skrbnika" (agenta)
- Takšna zahteva bi morala biti zaskrbljujoča, verjetno komunicirate z goljufi.
- Prenos na račun podjetja s podobnim imenom
- Bodite previdni. Goljufi se lahko prikrijejo kot znane družbe, saj opravijo manjše spremembe imena. Ne prenesite sredstev, če je ime podjetja sumljivo.
- Zamenjava lastnih podatkov na računu resničnega podjetja
- Pred prenosom poskrbite, da so navedeni podatki pravilni in da se nanašajo točno na določeno podjetje.
Kontaktirajte prodajalca
+90 507 573...
Pokaži
+90 507 573 42 81
+90 535 670...
Pokaži
+90 535 670 40 42
Turčija 
Turčija, Konya
7.300 kg
Turčija, Antakya/Hatay
Turčija, Konya
Turčija, Konya
45 kg
Neto teža
14 kg
Turčija
10.000 kg
Turčija
Turčija, Konya
26.000 kg
Neto teža
6.200 kg
Turčija, Kartepe/Kocaeli
14.500 kg
Turčija, Kartepe/Kocaeli
Turčija, Konya
7.500 kg
Turčija, Konya
Turčija, Konya
Turčija, Konya
26.000 kg
Neto teža
7.000 kg
Turčija
Turčija, DILOVASI / KOCAELI
Turčija, DILOVASI / KOCAELI
Turčija, DILOVASI / KOCAELI
Turčija
Turčija, Konya
38.000 kg
Neto teža
5.200 kg
Turčija
Dimensions
Width
:
Max. 2.550 mm.
Height
:
Max. 4.000 mm. *
Axle Distance Range
:
1.300 ~ 1.400 mm. *
King-Pin Height
:
1.250 ~ 1.350 mm. *
Curb Weight
:
5.000 ~ 6.000 kg. *
Capacity
Geometric Volume
:
20.000 ~ 40.000 l. *
Number of Partitions
:
1 ~ 7 *
Tank
Tank Code
:
LGBF
Tank Class
:
Class 3
Building Material Series
:
Alloy Aluminum
Products to be Carried
:
Gasoline, Diesel, Jet A-1 Fuel Oıl
Operating Temperature
:
-20 ˚C +50 ˚C
Certification
:
ADR - Turkey TSE / TÜV AUSTRIA
* It varies depending on the product type and optional equipment selected.
Tank Body
EN 13094-compliant conical-cylindrical section design,
One outer camber in the front and rear, one inner camber/breakwater in accordance with the EN 13094 design standard and the number of compartments selected.
ISO 3834 authorized weld production quality qualification,
ISO 9001: 2015 QUALITY MANAGEMENT SYSTEM
ISO 14001: 2015 ENVIRONMENTAL MANAGEMENT SYSTEM
EN ISO 9606 - 1: WELDERS QUALIFICATION CERTIFICATE
COMPLY WITH THE ECE R 105 DANGEROUS GOODS HANDLING REGULATION.
COMPATIBLE WITH ECE R 111 ROLLING STABILITY APPROVAL FOR TANKERS
In the tanker manufacturing industry, conical and primary body structures, transversely seamless, monolithic plates, and their welding joints, created with the longest welding seam technology, having the fewest number of joint (T) points, a safe, smooth surface, and distinctive body structures.
The stress effect on the body and welding faults produced by the human factor are eliminated and made safe against hits and impacts by employing continuous, high-performance robotic welding technology.
Robotic welding is used on the monoblock connection saddles to make sure that the body is held together by a single piece. This makes the body stronger and reduces the stress at the chassis’ joints.
The sloped design of the chassis makes it easy for liquid to flow out, making sure that none of the liquid stays in each tank compartment.
EN 15120-compliant air gap safety against expansion and overflow.
Filling / Discharging Line
Filling Line:
Depending on the driving direction with couplings, the filling mouth on the manhole covers will be on the right arm from the bottom or the top.
Discharging Line:
Free discharge to the flow via EN 13094 discharge line piping, extending from the foot valves to the couplings and inclined to remain in the line after discharge.
ISO 3834 Welded manufacturing quality certification authorized discharge pipes welded to imported patent elbows.
Chassis
Specially constructed monoblock chassis, inclined horizontally and vertically in accordance with body design to provide tipping safety
The precise fit between the monoblock connection saddles and the chassis mounting slots creates a rigid structure and boosts strength.
The stress-reduction gaps on it ease tension by spreading the force caused by the road conditions across the walking group.
Chassis construction parts are manufactured in perfect harmony using synergistic welding machines by certified welders within the framework of ISO 3834 Welded manufacturing quality qualification approval.
Chassis Equipment:
King-Pin
:
Parts type-approved in accordance with the ECE R 55 standard, 2" or 3.5", can be installed and removed from the bottom.
Mechanical Legs
:
Each trailer support leg has a double speed, a dynamic load capability of 25 tons, and a static load capacity of 50 tons.
Axles
:
Axle set, each with a capacity of 9 or 10 tons, air suspension, drum or disc brakes
Rims
:
14,00 or 11,75 x 22,5
Tires
:
425 or 385 /65 R 22,5
Brake System
:
2S2M EBS brake system compliant with ECE R 13
Electric System
:
ADR electrical set compliant with ECE R 105 regulation.
Bumper
:
Compliant with ECE R 58 regulation
Paint
At least two coats of epoxy primer.
Two coats of acrylic paint and the final coat of "OVEN PAINT" application,
The technologically advanced equipment ensures uniform distribution to every spot on the body and surface brilliance in the varnished paint gloss.
TÖKE TRAILER reserves the right to make changes to the items. Technical information is approximate and intended for standard product application. Dimensions may vary based on the brand and model of the truck. The information provided above does not represent an offer. You can obtain further product-related details by contacting us.