Stroj za pripravo ledene površine Zamboni Sport Ice Bumbleebee 160. Pro

We are selling a slightly used Ice Resurfacer. Made in China in 2024. Brand name: Sport Ice. Model Name: Bumblebee 160 Pro. Suitable for compact ice rinks from 400 untill 800m2. Can also be used for bigger ice rinks but then you need to emty the snow tank and refill the water tank seweral times. This machine is compact, has small turning radius. Li-ion battery powered. Charger included. The machine has the following options included: Pro package board brush, high rise blade tower, extra blade and side brush, tire wash system.

More info and pictures available upon request.

product data
MACHINE DIMENSIONS

Length (Overall) :2286 mm
Width (Conditioner):1620 mm
Width (Body):1118 mm
Height:1524 mm

WEIGHT
Machine Weight (Empty):1106 kg
Machine Weight (Full Water):1334 kg

SNOW TANK
0.50 Cubic Meter Capacity Steel Fabricated Tank
Manually Opened Snow Tank Lid With Lift Assist Gas Springs
Gravity Dumping Of Snow Tank

WATER TANK
228-liter Capacity
Aluminum Water Tank With Water Level Gauge
Manual Control Valve For Control Of Gravity Fed Water System Ports For Optional Cartridge Style Heating Elements

CONDITIONER

1620mm Wide, Shaving Blade 1524 Wide

Horizontal Screw Conveyor, 203mm (8")with Double Flighting In Snow Transfer Area
Water Distribution Pipe
Controlled Blade Shaving Depth Via Adjusting Hand Wheel
Plastic Wear Strips
Chain Drive Auger From Sauer Snm Motor
Aluminum Towel Bar And Spreader Cloth

DRIVE TRAIN

Wheelbase: 965 mm
Wheel Track: Front:973mm
Wheel Track: Rear:1012 mm
Ground Speed:16kph Max

Description

HYDRAULIC SYSTEM

The hydraulic flow has 28-liter hydraulic oil tank with filler/breather, suction strainer and return line filtration (10 micron). The hydraulic oil tank is built with a “passive heat exchanger” system. The oil tank encircles the vertical auger housing so that the snow passing through the vertical auger cools the hydraulic oil.

The hydraulic oil heats the auger housing and reduces icing and snow jams in the vertical auger housing 2 section manually operated control valve provides for operator control of lift bar and auger motors. An adjustable flow divider with separate relief valve for the steering circuit.

BATTERIES

48V Smart Charger
Lithium battery package 48v, 200ah lifepo4; smart charger for lithium batteries; 110 vac or 220 vac input; include battery monitoring system（bms).

MACHINE LOOMS

All machine looms use Deutsch waterproof connectors, harnesses enclosed in split loom conduit. ELECTRIC CONTROLS
Sevcon: solid state traction control on heat sink with onboard diagnostics


LIFT BAR
Custom designed and fabricated weldment, hydraulically actuated
lift bar stroke （and the resulting down pressure）is adjustable via threaded cylinder and clevis Double P.O. check valve manifold “locks” in down pressure for ice shaving performance


VERTICAL AUGER
152.4mm （6”） diameter auger enclosed in steel tube, 330 mm （13.0”）dia slinger for superior snow compaction
Auger is powered by a Sauer SNM motor via a chain drive


FINAL DRIVE

Wheels/tires: 18* 8.00-12.5 tires studded with ice screws Ground speed: 16kph （10 mph）maximum
Graziano rear axle with brakes; D&D Traction motor mounted directly to axle

STEERING SYSTEM

Danfoss OSPM hydraulic steering control powering a hydraulic steering cylinder, 356mm （14”）diameter steering wheel


OPERATOR’S STATION

Operator compartment contains:
steering wheel
manual brake pedal with parking brake
directional control switch
accelerator type foot pedal for machine ground speed
light switch
hydraulic control valve levers
water supply control rod
horn button
hydraulic pump on/off switch.
A digital display for battery discharge information, diagnostics (fault codes）and hour meter.
All weather captain' s chair（armrests).


OPTIONS INCLUDED

Pro package （board brush, high rise blade tower, extra blade）
Tire wash system
Additional shaving blades